Towards a modern approach to traditional use of Helichrysum italicum in dermatological conditions: In vivo testing supercritical extract on artificially irritated skin.

ETHNOPHARMACOLOGICAL RELEVANCE: Helichrysum italicum has been widely used in traditional medicine to treat allergies, colds, cough, skin, liver and gallbladder disorders, inflammation, infections, and sleeplessness. Furthermore, it possesses considerable wound healing and skin protective properties, documented by several in vivo studies performed on animals. However, there is a lack of experimental evidence supporting its potential as a topical agent tested by human clinical trials. AIM OF THE STUDY: The study aimed to investigate the skin protective activity of cotton gauze and polypropylene non-woven fabric, impregnated with H. italicum extract by the integrated supercritical CO2 extraction-supercritical solvent impregnation process. MATERIALS AND METHODS: The integrated process of supercritical CO2 extraction of H. italicum and the impregnation of cotton gauze and polypropylene non-woven fabric was performed under 350 bar and 40 °C with and without the addition of ethanol as a cosolvent. Impregnated textile materials were tested in vivo for their bioactivity on irritated human skin. Randomized in vivo studies performed involved assays of both safety and efficacy of the impregnated textiles. The effects were evaluated using the in vivo non-invasive biophysical measurements of the following skin parameters: electrical capacitance, transepidermal water loss, melanin index, erythema index, and skin pH. RESULTS: Both cotton gauze and polypropylene non-woven fabric were impregnated with H. italicum extracts under supercritical conditions with considerable values of the impregnation yield (1.97%-4.25%). The addition of ethanol as a cosolvent during the process caused significant changes in the incorporated extracts' impregnation yield and chemical profile. Both impregnated textile materials were safe, evaluated by their testing on the human skin with no cause of any irritation and redness. However, efficacy studies revealed that polypropylene non-woven fabric impregnated with H. italicum extract with ethanol as a cosolvent, possessed significantly greater potential for skin protection than the other investigated samples. CONCLUSIONS: The present study demonstrated the feasibility of the combined supercritical extraction and impregnation process in developing materials for topical application based on H. italicum extract. The results of in vivo studies performed on human volunteers confirmed the suitability of H. italicum active components to be a part of human skin protective preparations because of their ability to maintain the skin unimpaired. Traditionally claimed applications as a medicinal plant capable of regenerating skin have been scientifically proven, in addition to employing green technology in obtaining the impregnated materials with a broad spectrum of utilization.

Supercritical CO2 Impregnation of Thymol in Thermoplastic Starch-Based Blends: Chemico-Physical Properties and Release Kinetics.

The aim of the present study was to investigate starch-based materials, prepared in an environmentally friendly way and from renewable resources, suitable for the development of biodegradable active food packaging. For this purpose, a bioactive compound (thymol) was incorporated into thermoplastic starch (TPS) and a TPS blend with poly (ε-caprolactone) (TPS-PCL) by the supercritical CO2 (scCO2) impregnation process. Impregnation experiments with scCO2 were carried out at a pressure of 30 MPa and temperatures in the range of 40-100 °C during 1 to 20 h. The structural, morphological, and thermal properties of the obtained materials were comprehensively evaluated. Bioactive component release kinetic studies were performed in water at 6 °C and 25 °C. It was shown that the scCO2 impregnation process could be successfully employed for thymol loading into TPS and TPS-PCL. The process was significantly influenced by the operating temperature and time as well as content of PCL. The samples showed a controlled release of thymol within seven days with a higher amount of released thymol from the TPS-PCL blend. The obtained materials are solvent-free and release the bioactive component in a controlled manner.

Polymeric Microfiltration Membranes Modification by Supercritical Solvent Impregnation-Potential Application in Open Surgical Wound Ventilation.

This study investigated supercritical solvent impregnation of polyamide microfiltration membranes with carvacrol and the potential application of the modified membranes in ventilation of open surgical wounds. The impregnation process was conducted in batch mode at a temperature of 40 °C under pressures of 10, 15, and 20 MPa for contact times from 1 to 6 h. FTIR was applied to confirm the presence of carvacrol on the membrane surface. In the next step, the impact of the modification on the membrane structure was studied using scanning electron and ion beam microscopy and cross-filtration tests. Further, the release of carvacrol in carbon dioxide was determined, and finally, an open thoracic cavity model was applied to evaluate the efficiency of carvacrol-loaded membranes in contamination prevention. Carvacrol loadings of up to 43 wt.% were obtained under the selected operating conditions. The swelling effect was detectable. However, its impact on membrane functionality was minor. An average of 18.3 µg of carvacrol was released from membranes per liter of carbon dioxide for the flow of interest. Membranes with 30-34 wt.% carvacrol were efficient in the open thoracic cavity model applied, reducing the contamination levels by 27% compared to insufflation with standard membranes.

Functional Modification of Cellulose Acetate Microfiltration Membranes by Supercritical Solvent Impregnation.

This study investigates the modification of commercial cellulose acetate microfiltration membranes by supercritical solvent impregnation with thymol to provide them with antibacterial properties. The impregnation process was conducted in a batch mode, and the effect of pressure and processing time on thymol loading was followed. The impact of the modification on the membrane's microstructure was analyzed using scanning electron and ion-beam microscopy, and membranes' functionality was tested in a cross-flow filtration system. The antibiofilm properties of the obtained materials were studied against Staphyloccocus aureus and Pseudomonas aeruginosa, while membranes' blocking in contact with bacteria was examined for S. aureus and Escherichia coli. The results revealed a fast impregnation process with high thymol loadings achievable after just 0.5 h at 15 MPa and 20 MPa. The presence of 20% of thymol provided strong antibiofilm properties against the tested strains without affecting the membrane's functionality. The study showed that these strong antibacterial properties could be implemented to the commercial membranes' defined polymeric structure in a short and environmentally friendly process.

Cellulose Acetate Membranes Modification by Aminosilane Grafting in Supercritical Carbon Dioxide towards Antibiofilm Properties.

The study explores the grafting of cellulose acetate microfiltration membranes with an aminosilane to attain antibiofilm properties. The grafting reaction was performed in the supercritical carbon dioxide used as a transport and reaction medium. The FTIR analyses and dissolution tests confirmed the covalent bonding between the aminosilane and polymer. The membranes' microstructure was investigated using a dual-beam SEM and ion microscopy, and no adverse effects of the processing were found. The modified membranes showed a more hydrophilic nature and larger water permeate flow rate than the neat cellulose acetate membranes. The tests in a cross-filtration unit showed that modified membranes were considerably less blocked after a week of exposure to Staphylococcus aureus and Escherichia coli than the original ones. Microbiological investigations revealed strong antibiofilm properties of the grafted membranes in experiments with Staphylococcus aureus, Listeria monocytogenes, Escherichia coli, and Salmonella Enteritidis.

Application of Supercritical Solvent Impregnation for Production of Zeolite Modified Starch-Chitosan Polymers with Antibacterial Properties.

In the present study, supercritical solvent impregnation (SSI) has been applied to incorporate thymol into bio-composite polymers as a potential active packaging material. Thymol, a natural component with a proven antimicrobial activity, was successfully impregnated into starch-chitosan (SC) and starch-chitosan-zeolite (SCZ) films using supercritical carbon dioxide (scCO2) as a solvent. Experiments were performed at 35 °C, pressures of 15.5 and 30 MPa, and an impregnation time in the range of 4-24 h. The highest impregnation yields of SC films with starch to chitosan mass ratios of 1:1 and 1:2 were 10.80% and 6.48%, respectively. The addition of natural zeolite (15-60%) significantly increased the loading capacity of films enabling thymol incorporation in a quantity of 16.7-27.3%. FTIR and SEM analyses were applied for the characterization of the films. Mechanical properties and water vapor permeability of films before and after the impregnation were tested as well. Thymol release kinetics in deionized water was followed and modeled by the Korsmeyer-Peppas and Weibull model. SCZ films with thymol loading of approximately 24% exhibited strong antibacterial activity against E. coli and methicillin-resistant Staphylococcus (S.) aureus (MRSA).

Supercritical Fluid Extraction of Celery and Parsley Fruit-Chemical Composition and Antibacterial Activity.

Supercritical fluid extraction as an environmentally friendly technology was applied to isolate biologically active extracts from celery and parsley fruits for potential applications in the food industry. The extractions were performed under mild temperature conditions of 39.85 °C and at pressures of 10 and 30 MPa. The extracts were analyzed regarding their chemical composition, antibacterial activity, and cytotoxic effect. Sedanolide was the dominant component of the celery fruit extracts, comprising more than 70% of the obtained fraction, while the content of apiole in the parsley fruit SC CO2 extracts exceeded 85%. The celery fruit extracts showed strong and moderately strong antibacterial activity against tested Staphylococcus aureus, Bacillus (B.) cereus, B. subtilis, B. circulans, Listeria (L.) greyi, L. seeligeri and L. welshimeri, with minimal inhibitory concentration (MIC) values between 160 and 640 µg/mL, and weak activity against the selected Salmonella isolates with a MIC of 2560 µg/mL. The parsley extract obtained at 10 MPa showed strong and moderately strong antibacterial effects against Bacillus strains with obtained MICs of 160-640 µg/mL, and weak activity against Staphylococcus, Listeria, and Salmonella with a MIC of 2560 µg/mL. Cytotoxicity investigation showed that the extracts with proven antibacterial activity had no cytotoxic effect on rabbit kidney cells at concentrations of up to 640 µg/mL.

Supercritical Fluid Applications in the Design of Novel Antimicrobial Materials.

Bacterial resistance to antibiotics is one of the biggest problems in the modern world. The prevention of bacterial spreading from hospitals to the community and vice versa is an issue we have to deal with. This review presents a vast potential of contemporary high-pressure techniques in the design of materials with antimicrobial activity. Scientists from all over the world came up with ideas on how to exploit extraordinary properties of supercritical fluids in the production of advantageous materials in an environmentally friendly way. The review summarizes reported methods and results.

Supercritical CO2 - assisted production of PLA and PLGA foams for controlled thymol release.

Amorphous, medical grade poly(d,l-lactic acid) (PLA) and poly(d,l-lactic-co-glycolic acid) (PLGA) were used to develop systems for controlled release of a natural bioactive substance - thymol. Supercritical carbon dioxide (scCO2) was successfully used both as an impregnation medium for thymol incorporation into the polymer matrix and a foaming agent in a single-step batch process. Impregnation of samples using low to moderate scCO2 densities (273 kg/m3 and 630 kg/m3) and short processing times (2 h and 4 h) enabled thymol loading of 0.92%-6.62% and formation of microcellular foams upon system depressurization. Thymol effect on structural and thermal properties on foamed samples was proven by FTIR and DSC. The effect of CO2 under elevated pressure on the neat polymers was analysed by high pressure DSC. Foaming of polymers with lower molecular weight by CO2 of higher density yielded foams with smaller pores. All tested foams released thymol in a controlled manner in phosphate buffered saline (PBS) at 37 °C within 3 to 6 weeks. Higher loading and lower cell density favoured thymol release rate, while its concentration in PBS for the tested period depended on foam interaction with the medium. Representative PLGA foam sample with the highest thymol loading (6.62%) showed controlled thymol release within 72 h in mediums having pH values from 1.1 to 7.4.

Separation of phytochemicals from Helichrysum italicum: An analysis of different isolation techniques and biological activity of prepared extracts.

Helichrysum italicum presents a valuable source of natural bioactive compounds. In this work, a literature review of terpenes, phenolic compounds, and other less common phytochemicals from H. italicum with regard to application of different separation methods is presented. Data including extraction/separation methods and experimental conditions applied, obtained yields, number of identified compounds, content of different compound groups, and analytical techniques applied are shown as corresponding tables. Numerous biological activities of both isolates and individual compounds are emphasized. In addition, the data reported are discussed, and the directions for further investigations are proposed.

Application of cellulose acetate for controlled release of thymol.

Cellulose acetate (CA) was investigated as a carrier towards development of material with controlled release of thymol as a natural substance with strong antibacterial properties using high pressure techniques. Effect of thymol content on CA was confirmed by SEM, FTIR and DSC methods. Kinetic of thymol release from CA was tested using simulated gastric and intestinal fluids (hydrochloric acid and phosphate buffer saline). Results were correlated with Korsmeyer-Peppas and Weibull model. Depending on the thymol content and chemical nature of the release medium, the time of thymol release varied from one to three days indicating CA as a promising carrier of thymol with potential uses from medicine to agriculture. The impregnated CA showed antibacterial activity against 23 tested bacterial strains including methicillin-resistant Staphylococcus aureus (MRSA) which is particularly important bearing in mind that this strain causes fatal infections in humans and animals.

Free-radical scavenging activity and antibacterial impact of Greek oregano isolates obtained by SFE.

The antioxidant and antibacterial properties of Greek oregano extracts obtained by fractional supercritical fluid extraction (SFE) with carbon dioxide were investigated and compared with the properties of essential oil obtained by hydrodistillation. According to DPPH, hydroxyl radical and superoxide anion radical scavenging activity assays, the supercritical extracts expressed stronger antioxidant activity comparing to the essential oil. The most effective was the supercritical extract obtained by fractional extraction at 30 MPa and 100°C after the volatile fraction had been extracted at lower pressure. At the same time this extract showed strong antibacterial activity against staphylococci, including MRSA strain, but did not affect Escherichia coli of normal intestinal flora. The essential oil obtained by hydrodistillation showed stronger antibacterial activity against E. coli, Salmonella and Klebsiella pneumoniae, comparing to the supercritical extracts but at the same affected the normal gut flora.